We cut and supply BLUE-MAX® boiler gaskets, manufactured from a proprietary tacky cloth of glass, synthetic fibers, and brass wire, impregnated with a blue elastomer compound. BLUE-MAX® boiler gaskets are engineered to provide all the durability, resilience, and sealing properties of an asbestos gasket, but without the asbestos.
The material is cut and formed to the desired size and shape, then coated with a proprietary Teflon material per MIL SPEC T-27730A. The finished gasket is easily installed and helps to reduce expensive boiler maintenance and downtime.
Have designs and know your gasket requirements?
Get in touch to discuss so we can quote your project.
Tests by major boiler manufacturers confirm that Blue-Max® gaskets seal with zero leakage on steam to 450 psi and on cold-water hydro tests up to 1500 psi. Blue-Max® withstands working temperatures up to 500 degrees Fahrenheit.
BLACK-MAX® Boiler Gaskets
Compared to spiral wound gaskets, Black-Max® seals better and has much better recovery properties. It also weighs less than half of that of a spiral gasket. While spiral gaskets require near-perfect conditions, Black-Max® gaskets seal on rough, pitted surfaces under less compressive load.
Why choose BLUE-MAX®
Zero Leakage Under Pressure
Easily Removed
Sizes Clearly Marked
Easy, Problem-Free Installation
Interchangeable Sizes
Maximum Sealing on Rough Surfaces
Chemical-Resistance
Extended Shelf Life
Zero Leakage Under Pressure
Zero Leakage Under Pressure
Even the slightest leakage is too much, as it increases maintenance and reduces boiler life. Tests by major boiler manufacturers confirm that BLUE-MAX® gaskets seal with zero leakage in steam to 450 psi and can withstand working temperatures up to 500°F. Rubber gaskets simply can’t take that kind of pressure and heat.
Easily Removed
Easily Removed
BLUE-MAX® gaskets will not stick to the plate after being in service. Removal is easy and requires no chiseling or buffing. This is important in reducing maintenance costs and boiler downtime.
Sizes Clearly Marked
Sizes Clearly Marked
Each gasket is permanently and clearly marked with its size, so you’ll know immediately that you have the appropriate one.
Easy, Problem-Free Installation
Easy, Problem-Free Installation
BLUE-MAX® gaskets offer installation advantages over other types. Because of the material’s construction and strength, there is no danger of over tightening the gasket and cutting it in half. A BLUE-MAX® gasket naturally lays flat on the flange, and requires no special installation tools, procedures or training. Simply install the gasket and crank it down.
Interchangeable Sizes
Interchangeable Sizes
Corresponding round and oval sizes are interchangeable, thanks to the unique properties of the material. It is not necessary to stock separate gaskets to accommodate slight size variations, and chances of a dangerous mismatch are reduced.
Maximum Sealing on Rough Surfaces
Maximum Sealing on Rough Surfaces
Rough and pitted surfaces on old or poorly maintained flanges pose no problem for a BLUE-MAX® gasket. The material is resilient enough to conform perfectly to surface topography and maintain the tightest possible seal.
Chemical-Resistance
Chemical-Resistance
The proprietary Teflon coating is resistant to the chemicals used in treating boiler water, so gasket life will be longer.
Extended Shelf Life
Extended Shelf Life
A BLUE-MAX® gasket won’t dry out or lose its strength while it sits on the shelf.
BLUE-MAX® Boiler Gaskets
Tests by major boiler manufacturers confirm that Blue-Max® gaskets seal with zero leakage on steam to 450 psi and on cold-water hydro tests up to 1500 psi. Blue-Max® withstands working temperatures up to 500 degrees Fahrenheit.
BLACK-MAX® Boiler Gaskets
Compared to spiral wound gaskets, Black-Max® seals better and has much better recovery properties. It also weighs less than half of that of a spiral gasket. While spiral gaskets require near-perfect conditions, Black-Max® gaskets seal on rough, pitted surfaces under less compressive load.
After earning a bachelor’s degree in Chemistry, Carl began his career working for BP as an Industrial Chemist before progressing through the company to become a supply chain specialist. For over 14 years, he operated extensively in the global business, focusing on supply chain management and integration.
His devotion to becoming a world-class leader started during his service in the Army Reserve, where he developed a particular interest in Australia’s Defence capability.
After serving on the Management Committee, Carl was elected President of the Australian Industry Defence Network (AIDN), Queensland in 2016 and in 2022, was appointed Chair of the AIDN National Board. Carl has an unwavering commitment to supporting and cultivating a strong defence industry in Australia.
With strong leadership skills and global corporate experience, Carl took up the Queensland Gasket reins in 2012. Since then, the company has continued to work closely across industries utilising his supply chain network, as well as adapting to meet the changing needs of consumers, technologies, and business opportunities.